Quantcast
Channel: Remote Desktop Services (Terminal Services) Forum
Viewing all 2335 articles
Browse latest View live
↧

Cannot activate Remote Desktop IP Virtualization on Windows 2008R2

December 17, 2012, 8:30 am
$
0
0

Hello

I am trying to activate Remote Desktop IP Virtualization on Windows 2008R2 but without success.

I followed instructions from here : http://technet.microsoft.com/en-us/library/ee308290(v=ws.10).aspx

And I have this error message in my log : 

La virtualisation IP des services Bureau à distance n’a pas pu charger C:\Windows\system32\TSVIPool.dll. Code d’erreur : 0x80070057.

In english : Remote Desktop IP Virtualization could not load C:\Windows\system32\TSVIPool.dll. Error code:0x80070057

Source : TerminalServices-TSAppSrv-TSVIP

Event : 114

Does anyone have a feedback about this error message ? I looked online for it but didn't find anything related.

Thanks in advance, 

Thibault

PS : Here is the information from my registry concerning the configuration

Key :          HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\TSAppSrv\VirtualIP

value 0 : 
  Name : EnableVirtualIP  Type : REG_DWORD Datas : 0x1

Value 1
  Name : ComponentDLL Type : REG_SZ  Datas : %SystemRoot%\system32\TSVIPSrv.dll

Value 2
  Name : VirtualMode Type : REG_DWORD Datas : 0x1

Value 3
  Name : AdapterAddress Type : REG_SZ Datas : 00-15-5D-06-3E-08

Value 4
  Name : IPPool Type : REG_SZ Datas : %SystemRoot%\system32\TSVIPool.dll


Name :          HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\TSAppSrv\VirtualIP\IPPool
Value 0
  Name : Start Type : REG_SZ Datas : 10.81.11.100

Value 1
  Name : End Type : REG_SZ Datas : 10.81.11.150

Value 2
  Name : SubnetMask Type : REG_SZ Datas : 255.255.255.128


Name :          HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\TSAppSrv\VirtualIP\PerApp

Name  :          HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\TSAppSrv\VirtualIP\PerApp\cmd.exe
Value 0
  Name : FullPathName Type : REG_SZ Datas : C:\Windows\System32\cmd.exe


Do you guys have any Feedback about this error message ? I looked for it online but didn't find anything about it.

Thanks, 

Thibault


↧
Search

Not seeing any improvement from RemoteFX in test Server 2012 VDI configuration

December 12, 2012, 6:47 pm
$
0
0

I've set up a test Server 2012 VDI deployment (VMs assigned to users). The VMs are Windows 7 Enterprise SP1 (due to application compatibility issues with Windows 8). My setup consists of the following:

  • Physical Domain Controller server running Server 2012
  • Physical Hyper-V Virtualization Host server running Server 2012, which hosts the following VMs:
  • Virtual "Remote Desktop Services" server running Server 2012 (RD Connection Broker, RD Web Access, RD Licensing)
  • Windows 7 Enterprise SP1 workstation assigned to user
  • Windows 7 Enterprise SP1 workstation assigned to user
  • Windows 7 Enterprise SP1 workstation assigned to user

I've successfully got the VDI environment up and running. Test users connect to their Virtual Desktops through the RD Web Access site on both Windows 7 and Windows 8 workstations, and I'm connecting to my Virtual Desktop through a Wyse R10L thin client.

I'm not really concerned with the lack of Aero in the Virtual Desktops, but I noticed some slowness watching YouTube videos, dragging Windows around, etc. I did some reading on RemoteFX and decided I needed to try it out on a single Virtual Desktop to see the improvement. Because I'm running Windows 7 VMs, my understanding is that the Server 2012 software-based GPU isn't available (only to Windows 8 VMs).

Therefore, I installed an ATI Radeon HD 6450 in the Virtualization Host. This particular machine doesn't have onboard graphics, so I removed the existing video card (wasn't compatible with DirectX 11) when I installed the 6450. I enabled the 6450 for RemoteFX use in the Hyper-V settings, then added the Remote FX 3D Video Adapter to my Windows 7 VM in its Hyper-V settings. I set it to Max 1 monitor with Max 1920x1200 resolution.

I know RemoteFX is enabled, because I can now enable Aero when I connect to my Virtual Desktop. However, I've connected from a Windows 7 desktop, a Windows 8 laptop, and my Wyse R10L thin client. RemoteFX is enabled in all places, but I don't notice any performance increase. I've disabled the Aero theme so it's a fair test (as I don't want the GPU's possible improvements to go only towards transparent windows).

With RemoteFX, I don't notice any difference in dragging windows around, watching YouTube videos/visiting content heavy websites, scrolling, minimizing and maximizing windows, etc. I've disable and re-enabled the RemoteFX adapter on my VM multiple times and really see no noticeable difference.

I'm slightly disappointed, as I was hoping this would bring the experience closer to an actual desktop. I'm wondering if anyone has any suggestions or tips on why I'm having this issue. My LAN is 100Mbps. Connecting via RDP directly to the VMs doesn't change the performance (compared to connecting through the Connection Broker through RD Web or thin client).

Thanks, I appreciate any help! If you need more information about anything, just let me know!

↧
↧

Windows 2012 RemoteApp: Drag/Drop between application windows

January 3, 2013, 1:12 pm
$
0
0

We have an application which normally installs on user computers/workstations.  We are looking to support RemoteApp based deployments (vs. standard RDP/TS) of the application.

We are in the process of testing our application under RemoteApp and we have encountered an odd problem.

There are a number of places within our application where users can drag/drop objects between *application* windows, to define relationships etc.

Under RemoteApp, however, the application receives drop commands (left-mouse release) as soon as the client cursor hovers over one of the open windows (most windows are drop targets), even though the user is still holding the mouse button down.

Needless to say, this causes issues -- drops occuring on wrong forms, users not being able to place drops within ordered lists.

Is this a known issue?  If there a solution for this?

↧

Multiple monitors not working in RDS on server 2012

December 13, 2012, 9:01 am
$
0
0

Hello.

I have a Windows 2012 server running RDS. Before RDS was installed a remote desktop session used all available monitors when 'use all my monitors for the remote session' was checked in the RDP client settings.

After I installed RDS the default session collection had a limit of 16 monitors that I was unable to edit. When I connected to the default session collection I could only get the remote session to display on 1 monitor.

I deleted that session collection, created a new one, and was able to edit the 'maximum number of redirected monitors' setting to the desired value of 2 but the remote session still only displays on 1 monitor. 

If the session collection is set to 2 monitors and the RDP client is set to 'use all my monitors' why is the remote session only displayed on 1?

Thanks.

Keith

↧

Server 2012 RDS - User Profile Disks - Errors during Logoff

December 19, 2012, 8:01 am
$
0
0

I have set up a test Server 2012 RDS collection (Single Server for now) and implemented User Profile disks.

I have two problems.

First: My generic test user can connect and does successfully use the user profile disk as expected. However, atlogoff, the system event log contains these errors:


The error (NTFS 137) is: The default transaction resource manager on volume C:\Users\ts3.test encountered a non-retryable error and could not start.  The data contains the error code.

The warning (NTFS 50) that concerns me is:

It appears that the user profile disk is being "disabled" or "disconnected" before the profile data is completely written at logoff. What can I do to troubleshoot this?

Second:

Update: A post from Mike Connor on the following page: -LINK- solved the problem described below. 

My administrative user always logs on now with a temporary profile. At the beginning, the UPD was working and mounting. That stopped working. In attempting to troubleshoot, I logged the admin user off and deleted the UPD disk file from the share. I remember it working again after generating a new UPD disk file in the share. Soon, it quit working again. I deleted the UPD disk file again from the share and ever since, it has never regenerated a new UPD andalways logs on with a temporary profile.








↧
↧

Server 2012 with Remote Apps installing on Windows XP machines

January 2, 2013, 11:57 am
$
0
0

Hi everyone, I have a new Server 2012 that I installed the RDS services on.

How do I push out the Remote Apps to my Windows XP clients?

In the past I could use MSI files, but I read that Windows 2012 does not support MSI files now to push out remote apps.

I also read that I could use a GPO but that only works with Win 7/Win 8 machines?

On my SBS 2011 server if I go to GPO, I am missing the GPO entry for Win 7 and Win 8 to push remote apps.

User Config > Policies > Administrative Templates > Windows Components > Remote Desktop Services -- I dont have the RemoteApp and Remote Desktop services entry here.

↧

Windows Server 2012 Virtual Desktop Template Issue

October 2, 2012, 2:03 pm
$
0
0

Hi

I have created a two server VDI infrastructure using Server 2012 RTM I have one server hosting the RDS connection broker and RD Web Access roles and then a separate server with Hyper-V server installed hosting the server 2012 RD Virtualisation Host.  I am hosting Windows 8 VDI images on these servers

When I create the virtual infrastructure from scratch I can created a new collection hosting pooled desktops and everything works no problem.  The issue arises when I need to update the template and re-create all the desktops.  For updating the desktops I am following the process below.

1- Make a copy of the existing desktop and then start it up in hyper-v and make my changes

2- Run sysprep with the /generalise /oobe /shutdown /mode:VM

3- Go into my Collection on my connection broker server and run the recreate all desktops task

4- Select my shutdown VM syspreped in step 2

At this stage I get an error stating "The virtual desktop must be in a stopped state:  Could not identify the state of the virtual desktop.  Ensure that the RD virtualisation host server is available on the network and the virtual desktop is shut down"

I have looked all over for errors in the logs and found nothing.  It look connection related or maybe something to do with WMI but I have run connection test between the servers and everything is ok.  The only solution I have found so far is if I remove the RD virtualisation host from my hyper-v server and then reboot and reinstall it then works again.

Can anybody help as I am running out of ideas on this one.

Thanks

↧

This computer can't connect to the remote computer

January 3, 2013, 6:57 pm
$
0
0

Hi,

When i download the app from the rd webpage, i get the message below

This computer can't connect to the remote computer. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator.

However, I could use the same PC to remotely connect as a rds client and i can do that from any pc. I can also log into the server as the user. i only face this problem when i try to open the downloaded webapp from the rd webpage

Has this occurred to anyone before?

Any solutions?

Thanks in advance

Arvind Rajan


↧
Search

Custom enpoint enumerator problem(IAudioClient:Initialize() is failing with the error code E_ACCESSDENIED)

January 3, 2013, 8:56 pm
$
0
0

Hi,

I am developing a Custom Audio Endpoint Enumerator for a custom protocol as per the guidlines in the linkhttp://msdn.microsoft.com/en-us/library/windows/desktop/ee958171(v=vs.85).aspx

I have implemented all the end point interfaces given in the following link

http://msdn.microsoft.com/en-us/library/windows/desktop/dd379708(v=vs.85).aspx

I have created the end point DLL and signed the DLL with signtool.

I am facing one problem and explained below.

1) Client application get the IMMDevice interface pointer from the end point DLL i.e _pIMMDevice.

2) It calls IMMDevice:Activate() to get the IAudioClient.

_pIMMDevice->Activate(__uuidof(IAudioClient), CLSCTX_INPROC_SERVER, NULL, reinterpret_cast<void **>(&_pIAudioClient));

3) Then client application calls initialize on the audio client interface

HRESULT hr = _pIAudioClient->Initialize(AUDCLNT_SHAREMODE_SHARED,
        AUDCLNT_STREAMFLAGS_EVENTCALLBACK | CLNT_STREAMFLAGS_NOPERSIST,
        _EngineLatencyInMS*10000, 0, _MixFormat, NULL);

problem is here. IAudioClient:Initialize() is failing with the error code E_ACCESSDENIED as HRESULT. I don't know whether this error is due to signing process or due to something else. I have checked the CodeIntegrity logs and I am not finding any error messages with respect to signing.

Please help me on this. I searched this similar issue here and I didn't find a proper solution and description.

I am reposting this issue in multiple forums to get the quicker response and different answers. Please forgive me.

Thanks & Regards,

Ramanujam

↧
↧

not able to connect to published virtual desktop in RD web access from internet, RD gateway is unavailable

January 3, 2013, 8:57 pm
$
0
0

Hello there,

Urgent attention is needed here-

I have one 2012 server runnning RD webaccess, RD gateway, RD connection broker and another 2012 server running RD virtualization host with HYper-v. I have published webaccess and gateway via TMG using the web publishing rule and allowed /* in the path. I can access RD webaccess URL from internet and can see the published desktops, but when I click on it it throws error-

Kindly note that I am using split namespace, it means my internal domain is the child of public domain. One thing I am getting confused.....when I click on published desktop....it gives me a untrusted verifier dialog box (I am using internal certs) and there i could see the RDgateway name as - RDgateway.internal.domain.com? shouldn't his be issue as this domain namespace is not public ...only "domain.com" is public and thus name resolution failing for rdgateway?

This is only my assumption as I have no idea how rd web access server redirects to rd gateway...??

Also sometime I can't login to rdweb access url..it keep prompting me for creds..?

Kindly note that I am using virual desktop pooled infrastructure and not using session based deployment. Thus I don't have RD session Host server, is this role still necessary if I am using virual machine based deployment?

Please help

MCTS|MCSE|MCSA:Messaging|CCNA


↧

Unable to take the RDP console session while exceed 2 session.

January 3, 2013, 6:36 am
$
0
0

We have windows server 2008 R2 Ent Edition.

Issue : unable to take the remote session getting below error

Remote Desktop Connection

This computer can't connect to the remote computer.

Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator.

We are able to take two session by any user session ID 0 & 1 .

While the both session in use then some trying to getting the RDP console session is not able connect.

In this case if the session is exceeded then should display the warning message

e,g

the ths uses are logged do want to disconnect but it not showing message its direct the below error "While the both session in use then some trying to getting the RDP console session is not able connect."

Can any help on this issue to resolve.

D.K Konar. NMS

↧

USB redirection issues

January 3, 2013, 11:03 am
$
0
0

Hello,

I may have mis- interpeted a guide and installed actual Fijitsu 5120C drivers on our Terminal services environment (Windows Server 2012 standard edition).  I believe this was incorrect for now the server attempts to load scanner drivers rather than redirect the existing USB device.    I cannot seem to uninstall the drivers or remove the device.  The drivers reload.   After a terminal services session launches the Fijitsu drivers load and the scanner disappears from the USB redirection list and shows up as an installed scanner.   Cool, except for no connection can be established with the scanner.  I used Windows 8 server 2012 drivers from the Fijitsu website to install.

I am guessing that the solution is to completely remove the drivers and then redirection might occur, but I cannot seem to prevent the drivers from loading.

I am an administrator on the Terminal services and I've uninstalled the drivers through control panel and removed the device through printer and devices, but the device keeps reloading.

Any ideas would be greately appreciated.

Thanks,

ED

↧

Remote App Problems

January 3, 2013, 3:15 pm
$
0
0
We're publishing the NAV Classic Client as a remote app and using the following arguments:

[code] SERVERNAME=192.168.0.X\msnav, DATABASE="DBName", COMPANY="CompanyName", NTAUTHENTICATION=1, OBJECTCACHE=9600, ID="Z:\ZUPS\%USERNAME%.zup"[/code]
Unfortunately when we use the remote app it just uses the default location for all the ZUPs, but when we use the arguments from a shortcut on a machine that has the classic client installed it works just fine which is kind of confusing to me.   Am I doing something wrong?   Is there a different argument that I should be using?
↧
↧

Windows Server 2012 Remote Desktop Services - Printer Redirect Problem on Mac

January 3, 2013, 1:01 pm
$
0
0
I have installed the Windows Server 2012 and configured the Remote Desktop Services. When i connect through the Windows System the Remote Desktop Client redirect the printer perfectly, but when a connect through the Remote Desktop Connection Client 2.1.1 on Mac OS, the redirect printers doesn't work. And, if I connect using the same software (Remote Desktop Connection Client 2.1.1 on Mac OS X) in a Windows Server 2008 the printers are redirected normally. Can anybody help me?
↧

Managing the (Metro) Start Screen on RDS

September 23, 2012, 12:42 pm
$
0
0

I've been looking for a way to manage the Start Screen on RDS in Server 2012, but can't find anything useful.

Previously I have used the 'Start Menu folder redirection GPO', to present a pre-configured Start Menu to the RDS users.

Well.... Now that the Start Menu is replaced by the Metro Start Screen, it seems that we'll have to manage that differently.

How do I do that in Server 2012? I don't want the users to have to manually setup their "startmenu"

regards

nikolaj

 

↧
Search

limit concurrent remote app session

January 24, 2012, 2:59 pm
$
0
0

Hi,

I have published an Access program using RemoteApp and I would like to limit the remote app to only 1 session.  I would like to limit the remote user to open the app in concurrent remoteapp session.  Is this possible?  Is there a setting that could handle this.

Any help or guidance out there would be appreciated.

↧

deleteing registry values starting with ## inside HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\DeviceClasses\GUID

January 3, 2013, 11:52 pm
$
0
0

Hi Experts

I was just going through the Terminal Performance document and got some information about inactive TS ports which may create problem on performance.I can see lots of values starting from ##. I understand that they are system produced information related to different-diffrent hardwares.

Is it safe to delete them? What will be impact on performance if i del them.

 


Regards Suman B. Singh

↧
↧

(Error 7054 - the system has reached its licensed logon limit. Please try again later.)

January 4, 2013, 12:40 am
$
0
0

Hi All,

Hope someone can help me please.

Any new terminal servers that we install in our environment we are unable to remote control through tsadmin.msc. We get the below error message pop up:

(Error 7054 - the system has reached its licensed logon limit. Please try again later.)

*No errors in the event log.

*Licensing mode is set to Per User

*The Windows Licensing service is disabled on both the TS and licensing server

*Existing TS's work fine.

Please can someone help, i'm really confused?

Thanks

↧

windows 2008 R2 Remote Desktop hangs on login

January 4, 2013, 1:34 am
$
0
0

hello everyone

ik have a little issue.

i have a server running: windows 2008 R2 standard 

specs:                            

Processor:Intel(R) Xeon(R) CPU E5649 @ 2.53Ghz 2.53 Ghz

Installed Memory:     4,00 GB

System Type:            64-bit Operating System                                                                                                                                         

i have one administrator account. when i take over a RDP session from my colleague there is no problem he gets log off en i can work on the server. 

but sometimes when ik try to log in, the screen hangs. i can type in a username and password but thats it.

i need to restart de server in order to solve the problem.

thanks in advance.




↧

Windows server 2012 RDWeb Publish Full desktop

December 13, 2012, 3:04 am
$
0
0

How do i publish a full desktop connection from a session host in the Windows server 2012 Remote desktop setup?

i know that in 2008R2 u could select it in the propertis of the session host but i can't find annything like that in the new interface.

hope someone can help

best Regards

Jonas

↧
Viewing all 2335 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>